Inoxpa’s Butterfly valve for Food Processing Sector

A Butterfly Valve is used to control the flow of material through a circular pipe or tube. Typically the material is air, gas, steam, or liquid. Certain dry materials may also be handled through a butterfly valve.

Simply, a butterfly valve consists of a circular disc with its pivot axis at right angles to the direction material is flowing. The valve is made up of a body, seat, disc, stem, and actuator. Each component part is available in a variety of materials called “trim features.” Properly combining trim features to address material handled and environment is important in selecting the correct model valve for its intended service.

Body 
A butterfly valve body can be made of cast iron, ductile iron, aluminum, carbon steel, stainless steel and exotic metals. 

Features of Inoxpa’s Butterfly valve for food processing industry

• Design complies with the requirements of the food processing industry
• Compact and robust valves
• Disc and half bodies are made of AISI 316L stainless steel forging
• Have major mechanical strength and better surface finish
• Low pressure loss
• Low torque. The design of the gasket provides total sealing and minimizes the tightening of the butterfly disc with the seal.
• Several model of easily interchangeable manual handles and pneumatic actuators
• Traceability of components
• Gasket materials complies with FDA specifications

Types of Inoxpa’s Butterfly Valves for Food processing industry

As a person becomes familiar with butterfly valves, they will undoubtedly discover other types of butterfly valves on the market. Listed below is a brief introduction to some of these best butterfly valves available in Indian market from Inoxpa.

Mix proof double butterfly valve

• Double safety system. The two butterflies aresimultaneously actuated by only one actuator
• The products are not mixed, they are always separated by a safety chamber with the leakage detection system that prevents accidental mixing in case of gasket failure

Sandwich Valve

• Flange connections
• Design allows to easily install or remove the valve without separating the pipes
• To wield the side parts of the pipe, there is no need in a total disassembly of the valve

Multiway double butterfly valve

• The two butterflies aresimultaneously actuated by only one actuator either manual or pneumatic
• Simple divert system, sanitary design, easy actuation in comparison with other 3 way valves.